Need help?Do you have a question about the AAVIK I-280 and is the answer not in the manual?
General| Type | Integrated Amplifier |
|---|---|
| Input Impedance | 10kΩ |
| Signal-to-Noise Ratio | > 100 dB |
| Power Consumption, Standby | < 0.5 W |
| Damping Factor | > 200 |
| Inputs | 4 x RCA, 1 x XLR |
| Outputs | 1 x RCA (Pre-out), Speaker Terminals |
Essential user guidelines for safe operation, including handling, cleaning, and placement.
Procedures for servicing and conditions requiring service, plus specific warnings.
Mutes audio outputs and pairs the device with an Apple remote control.
Selects sources, accesses menus, and navigates settings with the front panel.
Used for firmware updates via RS-232 connection; check homepage for updates.
Button F accesses the menu for settings adjustment.
Set input gain between inputs and pre-out; power amp adds 26dB gain.
Configure one input for fixed volume for home theatre use.
To Next Page
