**Boost mode should only be used in low
temperature environments with adequate
clearance of exhaust / intake vents. DO
NOT block vents while operating in
Boost mode.
32
Picture Settings
Picture Mode
• Changes the picture mode to
dierent settings depending on
your usage
Color Temperature
• Adjusts the color temperature
from warm to cool (red to blue)
Aspect Ratio
• Changes the aspect ratio of the
picture - Auto, 4:3, 16:9*, etc.
Noise Reduction
• Cleans up MPEG “noise” without
compromising picture resolution
Projection Direction
• Flips the projected image
*Caution: Some pictures may be cut o
when aspect ratio is set incorrectly
To Next Page