**Boost mode should only be used in low
temperature environments with adequate
clearance of exhaust / intake vents. A tripod
is highly recommended. DO NOT block
vents while operating in Boost mode.
36
Picture Settings
Picture Mode
• Changes the picture mode to
dierent settings depending on
your usage
Color Mode
• Adjusts the color temperature
from warm to cool (red to blue)
Aspect Ratio
• Changes the aspect ratio of the
picture - Auto, 4:3, 16:9*, etc.
Brightness Mode
• Choose between Eco, Standard,
and Boost**
Projection
• Flips the projected image
Noise Reduction
• Reduces the noise on the video
*Caution: Some pictures may be cut o
when aspect ratio is set incorrectly
To Next Page
Loading...
