The hardware volume adjustment can be accessed via the “VOL +” and
“VOL –“ buttons on the remote control. Please note that there is an
additional software volume adjustment available while playing videos.
The “Menu”, Reverse, Forward, Play/Pause buttons function the same
as the MP4 player buttons found on the top of the projector. Please see
the MP4 player section for more information.
MP4 PLAYER CONTROL
TROUBLE SHOOTING
No Power
Solution: Check to ensure the battery is charged or the P2 is plugged in
No Sound
Solution: Check to make sure the volume is on
Pictures appear distorted
Solution: Check to make sure picture resolutions are correct. Files larger than 640x480
are re-processed by the player which may cause distoration.
Cannot Connecto USB Port
Solution: Check the USB Cable. Switch USB Ports
Media player has problems playing files or files are incompatible
Soluton: Due to the large variety of encoding methods, not all encoding methods
are supported by our media decoder. First check to make sure the file resolution
is the appropriate size (no larger than 640x480). Second check to make sure the
bit rate is not too high. We recommend using conversion utilities such as
FormatFactory freeware conversion software to obtain a better conforming
encoding of video files
VOLUME ADJUSTMENT
To Next Page
Loading...
