19
4.2.4 Antenna Settings for Motor
Menu-> INTALLATION ->Antenna Settings->Motor
1. Motor Mode:
Select DiSEqC 1.2 or USALS
using the ◄/► button.
DiSEqC 1.2: General motor
antenna using DiSEqC 1.2.
USALS: Motor antenna using
USALS.
Move Auto[W/E]
Press ◄/► button, the dish will be motorized to East/West continuously, it will stop
until it find the best signal.
Move west-east
Press ◄/► button, the dish will be motorized to East/West step by step, until you
find the best signal showed on the signal bar.
Fine Tuning(1)
Input digital button to set the moving step
Store Position
Save the current position you searched.
Go to Position
Press OK button to move the dish to the position which you saved.
Go to Reference
Press OK button to move the dish to 0 position.
To Next Page
Loading...
