ABB 1MRK002826-AG - Page 20

IEC 61850 or
function name
ANSI Function description Generator
REG670
(Customized)
REG670 (A20)
REG670 (B30)
REG670 (C30)
LD0LLN0 IEC 61850 LD0 LLN0 1 1 1 1
SYSLLN0 IEC 61850 SYS LLN0 1 1 1 1
LPHD Physical device information 1 1 1 1
PCMACCS IED configuration protocol 1 1 1 1
SECALARM Component for mapping security events on
protocols such as DNP3 and IEC103
1 1 1 1
FSTACCSNA Field service tool access via SPA protocol over
Ethernet communication
1 1 1 1
FSTACCS Field service tool access 1 1 1 1
IEC 61850-9-2 Process bus communication, 8
merging units
0-1 1-P30 1-P30 1-P30
ACTIVLOG Activity logging 1 1 1 1
ALTRK Service tracking 1 1 1 1
PRP IEC 62439-3 Parallel redundancy protocol 0-1 1-P23 1-P23 1-P23
HSR IEC 62439-3 High-availability seamless redundancy 0-1 1-P24 1-P24 1-P24
PMUCONF,
PMUREPORT,
PHASORREPORT1,
ANALOGREPORT1
BINARYREPORT1,
SMAI1 - SMAI12
3PHSUM
PMUSTATUS
Synchrophasor report, 16 phasors (see Table 7) 0-1 1-P34 1-P34 1-P34
AP_1-AP_6 AccessPoint_ABS 1 1 1 1
AP_FRONT Access point front 1 1 1 1
PTP Precision time protocol 1 1 1 1
ROUTE_1-ROUTE_6 Route_ABS 1 1 1 1
FRONTSTATUS Access point diagnostic for front Ethernet port 1 1 1 1
SCHLCCH Access point diagnostic for non-redundant Ethernet
port
6 6 6 6
RCHLCCH Access point diagnostic for redundant Ethernet
ports
3 3 3 3
DHCP DHCP configuration for front access point 1 1 1 1
QUALEXP IEC 61850 quality expander 96 96 96 96
Remote communication
BinSignRec1_1
BinSignRec1_2
BinSignReceive2
Binary signal transfer, receive 3/3/6 3/3/6 3/3/6 3/3/6
Generator protection REG670
1MRK 502 074-BEN M
Version 2.2
20 Hitachi Power Grids
© Copyright 2017 Hitachi Power Grids. All rights reserved