Table 7. Number of function instances in Synchrophasor report, 16 phasors
Function name Function description Total number of
instances
PMUCONF Configuration parameters for IEC/IEEE 60255-118 (C37.118) 2011 and
IEEE1344 protocol
1
PMUREPORT Protocol reporting via IEEE 1344 and IEC/IEEE 60255-118 (C37.118) 2
PHASORREPORT1 Protocol reporting of phasor data via IEEE 1344 and IEC/IEEE 60255-118
(C37.118), phasors 1-8
2
ANALOGREPORT1 Protocol reporting of analog data via IEEE 1344 and IEC/IEEE 60255-118
(C37.118), analogs 1-8
2
BINARYREPORT1 Protocol reporting of binary data via IEEE 1344 and IEC/IEEE 60255-118
(C37.118), binary 1-8
2
SMAI1–SMAI12 Signal matrix for analog inputs 1
3PHSUM Summation block 3 phase 6
PMUSTATUS Diagnostics for IEC/IEEE 60255-118 (C37.118) 2011 and IEEE1344 protocol 1
Generator protection REG670
1MRK 502 074-BEN M
22 Hitachi Power Grids
© Copyright 2017 Hitachi Power Grids. All rights reserved