ABB 1MRK002826-AG - Page 23

Basic IED functions
GUID-C8F0E5D2-E305-4184-9627-F6B5864216CA v14
Table 8. Basic IED functions
IEC 61850 or function
name
Description
INTERRSIG
SELFSUPEVLST
Self supervision with internal event list
TIMESYNCHGEN Time synchronization module
BININPUT, SYNCHCAN,
SYNCHGPS,
SYNCHCMPPS,
SYNCHLON,
SYNCHPPH, SYNCHPPS,
SNTP, TIMEZONE
Time synchronization
DSTBEGIN GPS time synchronization module
DSTENABLE Enables or disables the use of daylight saving time
DSTEND GPS time synchronization module
IRIG-B Time synchronization
SETGRPS Number of setting groups
ACTVGRP Active parameter setting group
TESTMODE Test mode functionality
CHNGLCK Change lock function
TERMINALID IED identifiers
PRODINF Product information
SYSTEMTIME System time
LONGEN LON communication
RUNTIME IED Runtime component
SMBI Signal matrix for binary inputs
SMBO Signal matrix for binary outputs
SMMI Signal matrix for mA inputs
SMAI1 - SMAI12 Signal matrix for analog inputs
3PHSUM Summation block 3 phase
ATHSTAT Authority status
ATHCHCK Authority check
AUTHMAN Authority management
FTPACCS FTP access with password
SPACOMMMAP SPA communication mapping
SPATD Date and time via SPA protocol
BCSCONF Basic communication system
GBASVAL Global base values for settings
PRIMVAL Primary system values
SAFEFILECOPY Safe file copy function
Generator protection REG670
1MRK 502 074-BEN M
Version 2.2
Hitachi Power Grids 23
© Copyright 2017 Hitachi Power Grids. All rights reserved