ABB 266D Series Operating Instructions

2600T Series Pressure transmitters | OI/266/PB-EN Rev. E 3
Contents
Contents
1. Introduction .............................................................. 5
1.1 Instruction manual structure ........................................... 5
1.2 Models covered by this manual ...................................... 5
1.3 Product description ........................................................ 5
2 Safety .......................................................................... 6
2.1 General safety information .............................................. 6
2.2 Improper use ................................................................. 6
2.3 Technical limit values ...................................................... 6
2.4 Warranty prevision ......................................................... 6
2.5 Use of instruction ........................................................... 7
2.6 Operator liability ............................................................. 7
2.7 Qualified personnel ........................................................ 7
2.8 Returning devices .......................................................... 7
2.9 Disposal ......................................................................... 7
2.10 Information on WEEE Directive 2012/19/UE ................. 7
2.11 Transport and storage .................................................. 8
2.12 Safety information for electrical installation ................... 8
2.13 Safety information for inspection and maintenance....... 8
3 Transmitter overview .................................................. 9
3.1 Transmitter components overview .................................. 9
3.2 Range & Span consideration ........................................ 10
4 Opening the box ....................................................... 11
4.1 Identification ................................................................. 11
4.2 Optional wired-on SST plate (I1) ................................... 12
4.3 Handling ...................................................................... 12
4.4 Storage ........................................................................ 12
5 Mounting ................................................................... 13
5.1 General ........................................................................ 13
5.2 IP protection & designation .......................................... 13
5.3 Mounting the transmitter .............................................. 13
5.3.1 Transmitter factory configuration .................... 13
5.3.2 Hazardous area considerations ...................... 13
5.4 Pressure Equipment Directive (PED) (2014/68/UE) ...... 14
5.4.1 Devices with PS >200 ..................................... 14
5.4.2 Devices with PS ≤200 bar ............................... 14
5.5 Mounting a Differential Pressure sensor transmitter ..... 14
5.5.1 Bracket mounting (optional) ............................ 15
5.5.2 B2 Pipe and wall mounting bracket details ...... 18
5.5.3 B5 Flat type bracket details ............................. 19
5.6 Mounting a P style pressure transmitter ....................... 20
5.6.1 B1 and B2 Barrel housing bracket details........ 21
5.6.2 B2 DIN Housing bracket details ...................... 22
5.7 Transmitter housing rotation ......................................... 23
5.8 Integral display rotation ................................................ 23
5.9 Impulse piping connection for standard instruments ..... 23
5.10 Process connections considerations .......................... 24
5.11 Kynar inserts connection ............................................ 24
5.12 Screw torques for models with Kynar inserts .............. 24
5.13 Installation recommendations ..................................... 25
5.13.1 Steam or liquids flow measurement............... 25
5.13.2 Gas or liquid flow measurement .................... 25
5.13.3 Level measurements (dry leg) ........................ 26
5.13.4 Level measurements (wet leg) ....................... 26
5.13.5 Level measurements on open tanks ............. 26
5.13.6 Pressure measurement of a tank ................... 27
5.13.7 Pressure measurement of a liquid in a pipe ... 27
5.13.8 Pressure of a condensable vapor in a pipe .... 28
5.13.9 Pressure measurement of a gas in a pipe ...... 28
6 PROFIBUS PA Communication Protocoll .....................29
6.1 Profibus
®
definition ...............................................29
6.2 System architecture – ABB solution .......................29
7 Device introduction .....................................................30
7.1 Feature overview ...................................................30
7.2 Transmitter wiring .................................................30
7.2.1 Cable connection ......................................30
7.2.2 PROFIBUS wiring procedure ...................... 30
7.2.3 PROFIBUS wiring procedure ...................... 31
7.2.4 Grounding ................................................31
7.2.5 Protective grounding ................................. 31
7.2.6 Integrated lightning protection (optional) ....31

ABB 266D Series Specifications

General

Brand	ABB
Model	266D Series
Category	Transmitter
Language	English