Need help?Do you have a question about the ABB 266 HART and is the answer not in the manual?
General| Type | Pressure Transmitter |
|---|---|
| Protocol | HART |
| Model Series | 266 |
| Manufacturer | ABB |
| Operating Temperature Range | -40 to 85 °C (-40 to 185 °F) |
| Output Signal | 4-20 mA |
| Power Supply | 10.5 to 42 V DC |
| Electrical Connection | M20x1.5, 1/2-14 NPT |
| Storage Temperature Range | -50 to 85 °C (-58 to 185 °F) |
| Housing Material | Aluminum or Stainless Steel |
| Wetted Parts Material | Stainless steel 316L |
| Protection Rating | IP67 |
| Response Time | < 100 ms |
| Long-Term Stability | ±0.15% of URL for 10 years |
Details the manual's structure, models covered, service centers, and product description.
Information on ABB's worldwide service network and a description of the 2600T Series pressure transmitter.
Overview of safety aspects, risk minimization, and general safety information for device operation.
Critical warnings regarding qualified personnel, safety regulations, and potential risks.
Details on improper use, technical limit values, warranty provisions, and safety symbols.
Outlines operator duties, qualified personnel requirements, and safety for electrical installation.
Critical warnings and procedures for safe inspection and maintenance activities.
Identification and diagrams of the differential pressure and gauge/absolute pressure transmitter components.
Details on range/span, packaging contents, identification plates, and certification information.
Information on the optional SST plate, handling guidelines, and storage conditions.
General mounting instructions, IP protection ratings, and factory configuration considerations.
Requirements for hazardous area installations and Pressure Equipment Directive (PED) compliance.
Instructions for DP transmitter mounting, including vertical positioning and bracket options.
Details on mounting P-style transmitters with various bracket types.
Instructions for rotating transmitter housing/display and guidelines for impulse piping.
Details on NPT threads, flange adapters, kynar inserts, and torque specifications.
Specific recommendations for flow measurements of steam, clean liquids, gas, and liquids with solids.
Guidelines for level measurement in open/closed tanks and pressure measurement in tanks.
Instructions for measuring liquid and condensable vapor pressure in pipes.
Important warnings for wiring, electrical codes, and cable connection types.
Details on HART analogue output wiring, supply requirements, and Harting connectors.
Step-by-step wiring, grounding, and optional lightning protection instructions.
Procedures for commissioning, standard settings for operation, and error detection.
How to enable/disable write protection, correct zero shifts, and set LRV.
Default factory settings, configuration types, and LRV/URV configuration using external pushbuttons.
Procedures for activating HMI interfaces and overview of menu navigation and button functions.
Overview of HMI menus for Process Alarm, Calibrate, Totalizer, Diagnostics, Device Info, and Communication.
Configuring language, tag, PV unit, range, transfer function, and damping via Easy Setup.
Configuring write protection, process variables, units, scaling, and security settings.
Adjusting display language, contrast, views, and units for process variables.
Configuring fail-safe behavior, saturation limits, and alarm limits for process monitoring.
Procedures for sensor trimming, output calibration, and resetting calibration parameters.
Configuring totalizer input status, mode, units, and conversion factors.
Configuring batch totalizer settings and managing the totalizer password.
Monitoring transmitter parameters and performing loop tests.
Displaying device info, revisions, and configuring communication settings.
Explanation of damping, Linear, and Square Root transfer functions.
Bidirectional flow, tank measurement, custom linearization, and configuration tool usage.
Connecting and using handheld terminals, including examples with communication resistors.
How LCD displays errors and error categories (Failure, Check, Spec, Maint.).
Detailed lists of error messages categorized by source.
Overview of maintenance, safety, potential part damage, and return procedures.
Step-by-step guides for replacing process flanges and the pressure transducer.
ATEX Directive requirements, IP protection, and application examples for European hazardous areas.
FM Approvals standards and certifications for North American hazardous locations.
Principles of IEC61508 safety, lifecycle management, and role responsibilities.
System safety requirements, fault detection, commissioning, and proof test procedures.
Summary of SIL2 safety-related parameters, PFD, MTBF, and MTTR values.
Using the trouble sheet, identifying conditions, and handling dangerous fluids during return.
Forms for return reports and decontamination declarations for equipment return.
Declaration of conformity to European directives (EMC, LVD, PED, ATEX) and applicable standards.
Website links to find local ABB contacts and obtain product information.
To Next Page
