18 OI/266/HART-EN Rev. D | 2600T Series Pressure transmitters
266 Models - HART
142 (5.59)
(*)
70 (2.75)
179 (7.02)
91 (3.58)
166 (6.53)
70 (2.75)
84 (3.31)
117 (4.60)
29 (1.14)
18 (0.71)
18 (0.71)
11 (0.43)
210 (8.28)
58 (2.28)
55 (2.17)
95 (3.72)
174 (6.86)
Figure 14: Differential Pressure Style transmitter with barrel housing installed on a box pipe with optional bracket for SST housing (B5)
B2 Pipe and wall mounting bracket details
All the bolts and nuts supplied are necessary for the installation on pipe. In case a panel or wall installation will be done, the
U-bolt and the U-bolt nuts and washers will not have to be used.
The bolts for panel mounting are not within the scope of supply.
Figure 13: Pipe and wall mounting bracket kit (B2)
1 - U-bolt
2 - U-bolt fixing bolt and washer
3 - Transmitter fixing bolts
4 - B2 bracket
4
1
3
2
To Next Page
Loading...
