ABB 615 Series - 2.2 Documentation

written to that output, not its present value. For this reason, the binary outputs are not
typically mapped to class 0.
Communication modes
The common DNP 3.0 communication modes are:
• Polled static mode, meaning that the master polls for class 0 or static data only
• Polled report by exception mode, where the Master polls for change events (class
1,2,3) and occasionally makes integrity polls (class 1, 2, 3, 0)
2.2 Documentation
This implementation of DNP 3.0 is fully compliant with DNP 3.0 Subset Definition
Level 2, and contains significant functionality beyond Subset Level 2.
1MRS756709 A Section 2
DNP 3.0 overview
615 series 11
Communication Protocol Manual