ABB 615 Series - Section 1 Introduction; 1.1 This manual; 1.2 Intended audience

Section 1 Introduction
1.1 This manual
Communication Protocol Manual describes a communication protocol supported by
the IED. The manual concentrates on vendor-specific implementations.
1.2 Intended audience
This manual addresses the communication system engineer or system integrator
responsible for pre-engineering and engineering for communication setup in a
substation from an IED perspective.
The system engineer or system integrator must have a basic knowledge of
communication in protection and control systems and thorough knowledge of the
specific communication protocol.
1MRS756709 A Section 1
Introduction
615 series 3
Communication Protocol Manual