ABB A43 - Installation

7
EN
EN
Installation
For information about how to mount and install the equipment, follow
the instructions in the Installation Guide at the end of this manual.
E Warning – Working with high voltage is potentially lethal. Per-
sons subjected to high voltage may suffer cardiac arrest, burn
injuries, or other severe injuries. To avoid such injuries, make
EMC compatibility
Impulse voltage test 6 kV 1.2/50μs (IEC 60060-1)
Surge voltage test 4 kV 1.2/50μs (IEC 61000-4-5)
Fast trans. burst test 4 kV ( IEC 61000-4-4 )
Immunity HF-fields 80 MHz - 2 GHz at 10 V/m (IEC61000-4-3)
Immunity conducted 150kHz – 80MHz ( IEC 61000-4-6 )
RF Emission EN 55022, class B (CISPR22)
ESD 15 kV ( IEC 61000-4-2 )
Standards IEC 62052-11, IEC 62053-21 class 1 & 2,
IEC 62053-22 class 0.5s, IEC 62053-23
class 2, IEC 62054-21, GB/T 17215.211-
2006, GB/T 17215.321-2008 class 1 & 2,
GB/T 17215.322-2008 class 0.5s, GB
4208-2008, EN 50470-1, EN 50470-3 cat-
egory A,B & C
Technical Data Direct connected Transformer conn.