1.5.4.1 Starting the IEC 61131 programm editor CODESYS
To start the IEC 61131 programm editor CODESYS:
Open an AC500 V2 project in Automation Builder
In the Automation Builder device tree double-click “Application”
ð
This will start the IEC 61131 programm editor CODESYS
1.5.4.2 Task configuration
A task is a time unit in the processing of a user program (IEC application), which defines by
parameters the way and the speed the CPU is executing the user program.
For this project you will use only one cycling task.
Open CODESYS editor
Ä
Chapter 1.5.4.1 “Starting the IEC 61131 programm editor
CODESYS” on page 20
1. In the CODESYS editor menu select the “Resources” tab.
2. Double click “Task configuration”.
ð
The Task configuration window opens.
Getting started with example projects
Example project for central I/O expansion > Programming and compiling
2023/03/033ADR010649, 3, en_US20
To Next Page
Loading...
