EasyManua.ls Logo

ABB ACS 301-1P6-3 User Manual

ABB ACS 301-1P6-3
101 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
User’s Manual
ACS 300 Frequency Converters
for Speed Control of
0.55 to 11 kW Squirrel Cage Motors
ACS 300
Question and Answer IconNeed help?

Do you have a question about the ABB ACS 301-1P6-3 and is the answer not in the manual?

ABB ACS 301-1P6-3 Specifications

General IconGeneral
CategoryMedia Converter
ManufacturerABB
ModelACS 301-1P6-3
Frequency50/60 Hz
Protection ClassIP20
Communication InterfaceModbus RTU
Operating Temperature-10 to +50 °C
Storage Temperature-40 to +70 °C

Summary

Safety Instructions

Overview of Safety

Provides an overview of safety instructions for installation, operation, and servicing.

Warnings and Notes

Distinguishes between warnings for serious conditions and notes for special attention.

General Safety Instructions

Outlines general safety instructions applicable to all work on the ACS 300.

Product Conformity in EEA

Electromagnetic Compatibility (EMC)

Information on EMC compliance and relevant directives.

Low Voltage Directive

Details compliance with the Low Voltage Directive.

Chapter 1 - Overview of This Manual

Chapter 3 - Power Connections

Mains Cable Requirements

Recommends screened cables for mains connections and fuse sizing.

Earthing and Earth Faults

Emphasizes the importance of proper earthing and how the ACS 300 handles earth faults.

Chapter 5 - Start-up

Commissioning Checklist

A flowchart checklist for safety, installation, parameters, and test runs.

Chapter 7 - Drive Parameters

Chapter 8 - Fault Tracing

Fault Indications and Memory

Explains how the ACS 300 indicates faults and stores them in memory.

Fault Resetting Procedures

Describes methods for resetting active faults and automatic restart options.

Fault Cause and Remedy

Provides a table listing fault indications, possible causes, and recommended remedies.

Related product manuals