viii ACS 300 User’s Manual
Product Conformity in EEA
The converter can be used in residential, commercial and light
industrial or industrial electromagnetic environments.
ACS 301 Frame Size R2
The converters with type codes ACS 301-8P7-3,
ACS 301-012-3 and ACS 301-016-3 are in conformity with prEN
61800-3: Adjustable speed electrical power drive systems -
Part 3: EMC product standard including specific test methods
1995 approved at voting 15.03.1996 to use in first environment
class conditions marketed in the restricted distribution mode as
well as in the second environment conditions.
ACS 311
The Converters of Series ACS 311 (without RFI-filter) are in
conformity with the following harmonised standard
The converters are not EMC compliant as such concerning
electromagnetic emissions.
CE marking in these converters refer to Low Voltage Directive
(73/23/EEC, as amended 93/68/EEC) only.
Low Voltage Directive
Low Voltage Directive 73/23/EEC, as amended by 93/68/EEC.
ACS 300 Frequency Converters including all types, as specified
in User’s Manual, Tables 1-1 and 1-2, are in conformity with the
following harmonised standard:
EN 60204-1, October 1992, following the provisions of this
Directive with the exceptions per following Clauses of
EN 60204-1:
EN 50081-2: 1993 EMC, Emission Industrial environment
EN 50081-2: 1995 EMC, Immunity Industrial environment
EN 50082-2: 1995 EMC, Immunity Industrial environment
To Next Page
Loading...
