Introduction to the manual
9
Introduction to the manual
What this chapter contains
The chapter describes the manual in short.
Applicability
The manual applies to the following air-cooled cabinet installed drives: ACS800-07,
ACS800-U7, ACS800-17, ACS800-37. The options concerned are listed on the
inside of the front cover.
Availability of the options
Note: All options described in this manual are not available for all drive types. Check
the availability from ACS800 Ordering Information (3AFE64556568), or with the
ACS800 Product Configurator (configuring tool for internal use).
Safety instructions
Target audience
The manual is intended for ABB sales and sales support personnel and drive
application engineers.
Purpose of the manual
The purpose of the manual is to introduce cabinet options which have not their own
manuals or are not described in the hardware manual or technical catalog.
Related documents
• Drive hardware manuals
• Cabinet option manuals
• Circuit diagrams delivered with the drive
Note: You can create circuit diagrams with the ACS800 Product Configurator
(configuring tool for internal use).
WARNING! Follow the safety instructions given in the hardware manual and other
manuals. Ignoring the instructions can cause physical injury or death, or damage to
the equipment.
To Next Page
