ABB ACS800 Multidrive User Manual

About this manual
7
About this manual
What this chapter contains
This chapter gives information on the manual.
Compatibility
The manual is compatible with the APBU-44(C) PPCS Branching and Datalogger
Unit.
Safety instructions
Follow all safety instructions delivered with the drive.
• Read the complete safety instructions before you install, commission, or use
the drive. The complete safety instructions are given in ACS800 Multidrive Safety
Instructions (3AFE64760432 [English])
• Read task specific safety instructions before starting the task. See the section
describing the task.
Contents and intended audience
The manual describes the APBU-44C(E) unit and its usage. It also gives instructions
for installing the unit in a user-defined cabinet.
The manual is intended for cabinet designers and installation personnel of
ACS800 Multidrive modules, and commissioning and maintenance personnel of
ACS800 Multidrive modules and ACS800 Multidrive.
The reader is expected to know the standard electrical wiring practices, electronic
components, and electrical schematic symbols.
Related publications
• ACS800-104 Inverter Modules Hardware Manual (3AFE64809032 [English])
• ACS800-104 IGBT Supply Modules Hardware Manual (3AFE68393124 [English])
• ACS800-107 Cabinet-built Inverter Units Hardware Manual (3AFE68233453
[English])
• ACS800-207 Cabinet-installed IGBT Supply Units Hardware Manual
(3AFE68233810 [English]).

ABB ACS800 Multidrive Specifications

General

Cooling Method	Air-cooled, Liquid-cooled
Control Method	Direct Torque Control (DTC)
Enclosure Rating	IP21, IP22, IP54
Communication Protocols	CANopen
Product Type	AC Drive
Number of Drives	Multiple
Voltage Range	380 to 690 V AC
Supply Voltage	380 to 690 V AC