ABB ACS800 Multidrive User Manual

Hardware description
9
Hardware description
What this chapter contains
This chapter shows an overview of the APBU-44C(E) unit and describes the
connectors, settings and LEDs.
APBU-44C(E) overview
The APBU-44C(E) PPCS Branching and Datalogger Unit is used to implement the
parallel connection of multiple ACS800 series inverter or supply modules. The
APBU-44C(E) also contains a datalogger for collecting and storing real-time data
from the module power stages to help fault tracing and analysis.
The APBU-44C(E) is a DIN rail-mountable unit and requires an external 24 V DC
power source.
The APBU-44C(E) is connected in the PPCS fibre optic link between the RDCU
drive control unit and the modules. The APBU-44C has connections for four inverter
or supply modules, while the APBU-44CE has connections for twelve.

ABB ACS800 Multidrive Specifications

General

Cooling Method	Air-cooled, Liquid-cooled
Control Method	Direct Torque Control (DTC)
Enclosure Rating	IP21, IP22, IP54
Communication Protocols	CANopen
Product Type	AC Drive
Number of Drives	Multiple
Voltage Range	380 to 690 V AC
Supply Voltage	380 to 690 V AC