ABB ACS880-01 - Materials of frames R1 to R3

10 Product materials
Materials of frames R1 to R3
The main components are shown in the figure below.
ACS880-01 frames R1 to R3 product materials
Frame R1 Frame R2 Frame R3
Total
weight
(kg) ~6
Total
weight
(kg) ~8
Total
weight
(kg) ~10
Part Category Qty Materials Weight (g) Weight (g) Weight (g)
1 Sheet metal parts 4 Zn plated Fe 800 830 1160
2 Reinforced plastic parts 2 Plastic: PC+10%GF, Brass 1210 1360 1710
3 Housing / Cover parts 5 Plastic: ABS PC 740 740 940
4 Heat sink 2 Aluminum: AW-6060 [Al MgSi] 960 1200 1560
5 Choke 1 Fe, Cu, PET+30%GF, silicone,
thermoplastic polyester, glass-filled nylon.
1390 2200 3060
6 Gaskets 7 (R1)
6 (R2)
6 (R3)
Rubber: TPE 50 50 60
7 Axial fan 1 Various materials, plastic parts: PBT. 90 210 210
8 Printed circuit board 2 Various materials, electronic components. 780 780 980
9 Semiconductors 1 Cu, AI oxide, Sn, silicone gel, PBT, GF 40 40 40
10 Control unit 1 See subcection Materials of the control
unit on page 15.
550 550 550
11 Control panel 1 See subsection Materials of the control
panel on page16.
130 130 130
Cables / Wires N/A PVC, Cu, GF, Sn, Au, Ni, phosphor
bronze, thermoplastic polyester, glass-
filled nylon.
30 30 30