ABB ACS880-01 - Materials of frames R6 to R7 and R8 to R9

Product materials 13
Materials of frames R6 to R7 and R8 to R9
The main components are shown in the figure below.
ACS880-01 frames R6 to R7 product materials
Frame R6 Frame R7
Total
weight
(kg) ~45
Total
weight
(kg) ~55
Part Category Qty Materials Weight (g) Weight (g)
1 Sheet metal parts 12…13 (R6)
13…14 (R7)
Zn plated Fe 12130…
12290
13760…
13920
2 Reinforced plastic parts 5 Plastic: PC+10%GF 800 910
3 Housing parts 3 Plastic: ABS PC, PUR, Brass 1440 1740
4 Terminal cover /
Insulating sheets
8…10 (R6)
8…12 (R7)
Plastic: PC 240…420 430…530
5 Housing / Cover parts 3 Plastic: ABS PC 1410 2080
6 Heat sink 1 Aluminum: AW-6060 [Al MgSi] 5520 7350
7 Choke 2 Fe, Cu, PET+30%GF, silicone, thermoplastic
polyester, glass-filled nylon.
9400 13800
8 Gaskets 23 (R6)
24 (R7)
Rubber: TPE 280 460
9 Axial fan 2 Various materials, plastic parts: PBT, aluminum
alloy.
940 940
10 Printed circuit board 3 (R6)
3…4 (R7)
Various materials, electronic components. 650 650…740
11 Bus bars 12…17 (R6)
15…20 (R7)
Cu, Sn 1240…
1660
1740…
2550
12 Terminal connectors 9 SS, Sn plated Cu, Zn plated steel 980 1110
13 Electrolytic capacitor 6 Al, electrolytic solution. 1680 2340
14 Semiconductors 7 (R6)
9 (R7)
Cu, Al oxide, Sn, silicone gel, PBT, GF 1380 2040
15 Control unit 1 See subsection Materials of the control unit on
page 15.
550 550