ABB ACS880 Series Firmware Manual

590 Control chain diagrams
Operating mode selection
19.12 Ext1 control mode
19.14 Ext2 control mode
19.11 Ext1/Ext2 selection
SPEED
Panel local
06.16 bit 8
Last speed active
SPEED
06.17 bit 5
Safe reference active
SCALAR
Value
99.04 Motor control mode
Value
Safety function active
19.01 Actual operation mode
Value
To torque selector
Selection
>
Fieldbus: ODVA CIP™
Selection
>
Value
19.16 Local control mode
SPEED
AND
SPEED
06.17 bit 6
AND
6.01 bit 0 Off1 control 6.01 bit 2 Off3 control
Value Value
60.03 M/F mode = M/F follower or D2D follower
Value
OR
21.20 Follower force ramp stop
Value
Value
6.01 bit 3 Run
Value
Value

ABB ACS880 Series Specifications

General

Cooling Method	Air-cooled, liquid-cooled
Enclosure class	IP21, IP55
Mounting type	Wall-mounted
Control method	Direct torque control (DTC)
Braking chopper	Integrated or external
Communication	Ethernet
Protection Features	Overcurrent, overvoltage, undervoltage, overload, short circuit, overtemperature, earth fault
Operating Temperature Range	-15°C to +50°C
Storage Temperature Range	-40°C to +70°C
Relative Humidity	5 ... 95 % (non-condensing)
Safety features	Safe torque off (STO)