￭ Moving the unpacked drive cabinet
Lifting the cabinet with a crane
WARNING!
Incorrect lifting can cause danger or damage. Obey the local laws and
regulations applicable to lifting, such as requirements for planning the lift, for
capacity and condition of lifting equipment, and for training of personnel.
Lift the drive cabinet by its designated lifting points. Depending on the size of the
cabinet, it has either bolt-on lifting lugs, or lifting bars with lifting holes.
Note: The minimum allowed height of the lifting slings with IP54 units is 2 meters
(6’7”).
62 Mechanical installation
Removing the transport package
Remove the transport package as follows:
1. Undo the screws that attach the wooden parts of the transport crate together.
2. Remove the wooden parts.
3. Remove the clamps with which the drive cabinet is mounted onto the transport pallet
by undoing the fastening screws.
4. Remove the plastic wrapping.
Moving the unpacked drive cabinet
Lifting the cabinet with a crane
Lift the drive cabinet using its lifting eyes. The lifting eyes can be removed after the cabinet
is in its final position, but their mounting holes must be blocked to retain the degree of
protection.
Note: The minimum allowed height of the lifting slings with IP54 units is 2 meters (6’7”).
IP54
12 Mechanical installation
To Next Page
Loading...
