Moving and unpacking the drive
Move the drive in its original packaging to the installation site as shown below to avoid
damaging the cabinet surfaces and door devices. When you are using a pallet truck,
check its load capacity before you move the drive.
The drive cabinet is to be moved in the upright position.
The center of gravity of the cabinet is high. Be therefore careful when moving the unit.
Avoid tilting.
￭ Moving the drive in its packaging
Lifting the crate with a forklift
WARNING!
Incorrect lifting can cause danger or damage. Obey the local laws and
regulations applicable to lifting, such as requirements for planning the lift, for
capacity and condition of lifting equipment, and for training of personnel.
Mechanical installation 9
To Next Page
Loading...
