ANR96 - USER MANUAL
-62-
14) ANR SERIAL COMMUNICATION PROTOCOL
The Electrical Multifunction Analyzer ANR series are disposal with two communication standard
protocols:
• ASCII
• MODBUS-RTU
and optional
• PROFIBUS
• TCP/IP Ethernet
The standard communication protocol has been optimised for the connection of the analysers with the
SW01 management software, allowing to use all the available functions (automatic search of the unit
in the network, automatic data downloading, etc.).
Even so the SW01 software supports the MODBUS protocol.
About all the information of protocols communication to see specific user manual (ANR SERIAL
COMMUNICATION PROTOCOL).
To Next Page
Loading...
