Field and Software Tools
CalMaster2 and CheckMaster 5 CalMaster2 IRIS Software
32 IM/VCM2 Issue 6
5.5 Transmitter Wizard
The transmitter wizard is used to configure the connection to the CalMaster2.
To open the Transmitter Wizard:
Either select 'Tools | Transmitter Wizard…' or click the down arrow next to the button on the
toolbar and click the button. The transmitter wizard dialog box appears:
Each configured CalMaster2 is displayed in the list.
The right-hand toolbar has five buttons:
New Opens the add New/Edit Configuration dialog box
– see Section 5.5.1, page 33.
Delete Deletes the selected configuration.
Edit Opens the selected configuration
Connect Connects to CalMaster2.
Open Opens a saved device configuration file.
Save Saves the selected device as a configuration file.
Ok Closes the dialog box using the selected connection.
Cancel Closes the dialog box without making any changes.
Note. If the 'Connect all transmitters' check-box is selected, when the button is clicked the
computer attempts to connect to all the listed configurations.
To Next Page
Loading...
