Field and Software Tools
CalMaster2 and CheckMaster 1 Introduction
4 IM/VCM2 Issue 6
1.1 CalMaster2 Options
There are two options of CalMaster2 available:
CalMaster IRIS
Enables the printing of service reports and certification to within 1% of factory calibration
(fingerprinted flow meters) or 2% (non-fingerprinted flow meters). Predictive diagnostics are
also provided to provide early warning of a possible system failure, enabling maintenance
engineers to anticipate problems and take planned remedial action in advance.
CalMaster2 comprises:
– CalMaster IRIS Verification Tool
– Enhanced IRIS Software
CheckMaster
Enables the validation of flow meters and the printing of a service report.
CheckMaster comprises:
– CheckMaster Validation Tool
–IRIS Software
The functions available for each option are:
CheckMaster CalMaster IRIS Page
Install Factory Files 34
Transmitter Wizard 32
CalMaster2 Wizard 27
Flowmeter Calibration Verification Report 35
Flowmeter Conformance Report 35
Trend Analysis 36
Table 1.1 CalMaster2 Options
To Next Page
Loading...
