Operating Instructions 7
CP600/Issue: 09.2011
Configuration Mode of MicroBrowser (Kiosk-Mode)
The MicroBrowser can run in “Kiosk-Mode” where the menu and the task bar will disappear.
1. To activate the Kiosk-Mode open My Device\Flash\MicroBrowser and double click on the icon
KioskMode.
2. To activate the menu and task bar double click the icon NoKioskMode.
Default is NoKiosk-Mode.
Autostart of MicroBrowser
1. To automatically start the MicroBrowser at startup of the Control Panel open
My Device\Flash\MicroBrowser and double click the icon Enable_Autostart.
2. To deactivate the autostart of the MicroBrowser double click the icon Disable_Autostart.
Start MicroBrowser
1. To start the MicroBrowser double click the icon MicroBrowser.
The dialog of the host or IP address appears.
2. Default remote address is http://192.168.0.10/webvisu.htm.
Change this IP address to the address of your remote web server (IP address of target PLC).
This address will be stored unless you change to Kiosk-Mode or NoKiosk-Mode like described
above.
3. To access the CoDeSys web server of AC500 type webvisu.htm in the field Path or full URL.
4. If you select the checkbox Always use these settings this configuration dialog will not appear any-
more, unless you change to Kiosk-Mode or NoKiosk-Mode like described above.
To Next Page
Loading...
