Operating Instructions 8
CP600/Issue: 09.2011
Exit MicroBrowser
If the MicroBrowser is not running in Kiosk-Mode use File\Exit from the menu bar.
If the MicroBrowser is running in Kiosk-Mode connect a USB-Keyboard and press <Shift> + <X>
In the CoDeSys visualization an exit button can be created. Choose the category Input.
Enable Execute program. Select (INTERN) EXITPROGRAM as configured program.
If Autostart is enabled and no keyboard is available:
1. Create a file autoexec.bat with the line del \Flash\autoexec.bat.
2. Copy this file to the root of an USB-Stick and insert it while the Control Panel is running.
3. Reboot the Control Panel. After the reboot the autostart is disabled.
Calibrate the Touch of the Display
1. Click on Windows Start.
2. Select Control Panel.
3. Double click on the symbol System Settings.
The system settings tool is a rotating menu through which you can scroll using the Next and Back
buttons.
4. Click on Next until Calibrate Touch appears in blue in the middle.
5. Double click it and follow the instructions.
6. Exit the rotating menu by pressing the cross in the upper right corner.
Update of the MicroBrowser
If a newer version of the MicroBrowser is available just replace the file
My Device\Flash\MicroBrowser\MicroBrowser_CE.exe with the new one copied on a USB-
Stick.
Be careful to select the right file for your Control Panel type.
To Next Page
Loading...
