Packaging for ...
43
Packaging for Transport or for Return to the Manufacturer
-If the original packaging material is no longer available, wrap the
module in a padded plastic film or corrugated paper board. Put the
wrapped device in a box laid out with a damping material like
foamed plastics. The thickness of the damping material should be
in accordance with the device weight and the type of
transportation.-- Label the box with a "handle with care" sticker.
For overseas shipping always add a desiccant bag (e.g. filled with
silica gel) and then weld the device in a 0.2 mm polyethylene foil.
Adapt the amount of desiccant to the packing- volume and the
approximate transportation time (at least 3 months). Additionally
line the box with a layer of union paper.-
To Next Page
Loading...
