Need help?Do you have a question about the ABB DMP 132-4L and is the answer not in the manual?
General| Type | DMP 132-4L |
|---|---|
| Rated Current | 132 A |
| Output Current | Up to 132 A |
| Supply Voltage | 380-480 V AC |
| Input Voltage | 380-480 V AC |
| Output Voltage | 0-500 V DC |
| Number of Quads | 4 |
| Control Type | Digital |
| Protection Class | IP20 |
| Cooling Method | Air-cooled |
Recommendations for foundation design and construction for machine installation.
Procedures for aligning directly coupled machines to ensure safe operation and longevity.
Method using dial indicators to measure and correct parallel deviations.
Steps for aligning machines connected via V-belt drives.
Diagrams showing permissible bearing loads for various DMP models.
Checklist of points to verify before starting the motor for the first time or after maintenance.
Checks to perform during the start-up sequence of the motor.
Maintenance schedule based on operating hours or time intervals.
Procedure for measuring insulation resistance using a 500V megger.
Common causes and signs of sparking and how to address it.
How to set and check the brush gear to the neutral position.
Using a grease gun for lubrication, intervals, and grease amounts.
Step-by-step instructions for disassembling the machine.
Step-by-step instructions for reassembling the machine.
To Next Page
