Need help?Do you have a question about the ABB DMP 132-4S and is the answer not in the manual?
Requirements for machine mounting area and foundation design.
Methods to check for angular and parallel deviations.
Points to check before starting the machine.
Checks to be performed during the start-up process.
Schedule for maintenance based on operating hours or time.
Procedure to check insulation resistance.
Common causes and implications of sparking.
General| Rated Current | 132 A |
|---|---|
| Horsepower | 75 HP |
| Output Current | 132 A |
| Control Type | Digital |
| Cooling Method | Forced Air |
| Protection Class | IP20 |
| Supply Voltage | 380-480 V AC |
| Input Voltage | 380-480 V AC |
To Next Page
