Need help?Do you have a question about the ABB DMP 180-4L and is the answer not in the manual?
Guidance for operating and maintaining DC motors.
Alerts to dangers from live and rotating machine parts.
Emphasizes maintenance must be done by trained staff.
General safety advice for operating DC machines.
Covers aspects of machine installation and mounting.
Requirements for machine foundation design.
Safely lifting machines using lifting eyes.
Inspecting and mounting couplings.
Methods for aligning direct coupled machines.
Using dial indicators for alignment correction.
Checks before motor installation and readiness.
Checks during initial start-up phase.
Scheduled maintenance tasks based on operating hours.
Procedure for measuring insulation resistance.
Procedures for lubricating DMP motors during operation.
Methods for cleaning motor windings based on contamination.
Guidelines for connecting cables to the terminal box.
Wiring diagrams for DC shunt wound motors.
Part numbers and nomenclature for DMP motor components.
To Next Page
General
