4 DISTRIBUTION SOLUTION EK6 – MEDIUM VOLTAGE EARTHING SWITCH 12…40,5 KV – 25–50 KA
—
Safety information
Your safety first – at all times!
That is why our instruction manual begins
with the following recommendations:
Only install switchgear in closed rooms suitable
for electrical equipment. Ensure that installation,
operation and maintenance is only carried out
by qualified competent elec tricians. Fully comply
with the legally recognized standards (IEC or
local), the connection conditions of the local
electrical utility and the relevant safety at work
regulations. Observe the relevant information
in the instruction manual for all actions
involving switchgear.
If you have any further questions about this
instruction manual, ABB's field service team will
be pleased to provide the required information.
We reserve all rights to this publication. Misuse,
including in particular, duplication and making
this manual - or extracts thereof available to
third parties is prohibited. We do not accept
any responsibility for the information provided,
which is subject to change.
Danger!
Pay special attention to the hazard notes
in the instruction manual marked with this
warning symbol.
• Make sure that the specified criteria are not ex-
ceeded under switchgear operating conditions.
• Ensure the instruction manual is accessible
to all personnel involved in installation,
operation and maintenance.
• The user's personal must act responsibly in all
matters relating to safety at work and correct
handling of the switchgear.
Warning!
• Always follow the instruction manual and
respect the rules of good engineering practice!
• Hazardous voltage can cause electrical shocks
and burns.
Warning!
Using of safety clothes like safety gloves
according to EN 388 Blade cut resistance class 5,
long sleeved work jacket or safety sleeves, safety
shoes is recommended during all activities done
with the switchgear.
• Disconnect power, then earth and shortcircuit
before proceeding with any work on this equip-
ment.
To Next Page
Loading...
