EasyManua.ls Logo

ABB EL3060-Magnos28 User Manual

ABB EL3060-Magnos28
144 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
ABB MEASUREMENT & ANALYTICS | OPERATING INSTRUCTION
EL3060
Continuous gas analyzers
Gas analyzers for use in
hazardous areas
Measurement made easy

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the ABB EL3060-Magnos28 and is the answer not in the manual?

ABB EL3060-Magnos28 Specifications

General IconGeneral
Largest Measuring Range0-100% O₂
Detection Limit0.01% O₂
Sample Gas Temperature0 ... 50 °C (32 ... 122 °F)
Power Supply24 V DC
Output Signal4 ... 20 mA

Summary

Safety Information

Intended Use and Important Safety Notes

Defines intended application and critical safety conditions.

General Safety Instructions and Regulations

Covers personnel qualifications, regulations, and operation safety.

Electrical and Explosion Hazards

Details risks related to electricity and explosive environments.

Hazardous Area Installation Requirements

Specific requirements for installations in hazardous areas.

Startup and Configuration

Configuring Analyzer Parameters

Covers range settings, alarms, I/O, network, language.

Calibration Procedures

Test Gases for Calibration

Details on necessary calibration gases for different analyzers.

Maintenance and Troubleshooting

Status Messages and Troubleshooting Guide

Interpreting status signals and resolving issues.

Related product manuals