Need help?Do you have a question about the ABB EasyLine EL3020 and is the answer not in the manual?
General| Display | LCD |
|---|---|
| Enclosure | IP65 |
| Housing Material | Plastic |
| Model | EL3020 |
| Manufacturer | ABB |
| Input | Voltage, Current |
| Output | Analog, Relay |
| Power supply | 24 V AC/DC |
| Accuracy | ±0.5% |
| Operating Temperature | -10°C to +55°C |
| Communication | Modbus |
Defines the specified uses and limitations of the gas analyzer.
Details necessary conditions and practices for safe and efficient device operation.
Emphasizes adherence to safety standards for risk prevention and device integrity.
Highlights potential hazards associated with accessing internal components.
Lists prerequisites and conditions the end-user must meet for safe operation.
Details environmental and power requirements for the installation site.
Outlines specific installation and operation requirements for flammable gases.
Details special requirements for explosion-proof versions.
Guide for inspecting the combustion gas supply line for leaks.
Procedure for verifying the seal integrity of the internal combustion gas path.
Method for regularly checking the sample gas feed path for leaks.
Critical information for analyzers used with flammable gases after opening paths.
Safety precautions for cleaning the keyboard overlay on explosion-proof units.
Addresses issues related to the flame not igniting during operation.
Explains the fail-safe mode and actions to take.
Details the procedure for shutting off gas supply when instrument air fails.
To Next Page
