To Next Page

To Previous Page

Operation Manual / 4 Product description / A150-M56/66/57/67 -

A155-M..

3 Commissioning / 3.3 Commissioning after taking out of operation

3.3 Commissioning after taking out of operation

If present

u Remove cover plates (blind flanges) from the compressor casing, the gas inlet and the

gas outlet.

Version with compressor wheel cooling:

u Remove the locking screw on the cooling air connection and fit the cooling air line.

General

u Check the exhaust gas pipe before and after the turbine for combustion residues or wa-

ter residues and clean it. Remove any foreign objects that may be present.

u Check and clean filter silencer or air supply line, and remove any foreign objects that may

be present.

u Put engine-side oil circulation to the turbocharger into operation.

u Prepare the turbocharger for operation (see Checks before commissioning →22).

u The turbocharger is now ready for operation.

Page 24 / 171

ABB HT610930 Instruction Manual

Other manuals for ABB HT610930