Manual for Induction Motors and Generators
Commissioning Report - 124
3BFP 000 050 R0101 REV E
4 Lubrication check
4.1 Self lubrication
4.2 Flood lubrication
4.3 Grease lubricated bearings:
Bearing oil: Manufacturer:__________________ Type:_________________________
The oil quality is the same as recommended:
Bearing oil is filled up to the indicated level:
Please mark the level in the sight glass circle
on the right
Lubrication rings rotate freely:
Bearing oil: Manufacturer:__________________ Type:_________________________
The oil quality is the same as recommended:
Lubrication rings rotate freely:
Flood lubrication oil pressure: ___________kPa
Oil flow: ___________liters/min
Rotation of the pumps checked:
Jack-up pumps checked:
Oil filters checked:
Grease: Manufacturer:__________________ Type:_________________________
The grease quality is the same as
recommended on the bearing plate:
The first greasing has been done: Date:_______________ Quantity:________g
Comments:
no yes
Sight Glass
no yes
no yes
no yes
no yes,
no yes
no yes
alarm setting:_____kPa, relief valve setting:______kPa
no yes
To Next Page
Loading...
Need help?
General
