ABB LMT200 - Page 33

33
LMT SERIES | MAGNETOSTRICTIVE LEVEL TRANSMITTER | OI/LMT100/200-EN REV.B
Menu: Easy Setup (continued)
Menu/Parameter Value Range Description
Easy Setup
Language English, Chinese, Portuguese, German, Spanish, French,
Italian
Menu language options.
Set PV Level, Interface, Distance/Ullage, Volume Level, Volume
Interface, Flow
Select device variable where applicable which will be

variable.
PV Unit • Unit length
- mm, cm, m, in, ft
• Unit volume
- Liters, Cubic meters, cubic inches, cubic feet, cubic
yards, gallons, Imperial gallons, bushels, barrels,
liquid barrels
• Unit flow
- Liters/second, liters/minute, liters/hour, gallons/
second, gallons/minute, gallons/hour, gallons/day,
imperial gallons/ second, imperial gallons/minute,
imperial gallons/hour, imperial gallons/day, barrels/
second, bar rels/minutes, barrels/hour, bar rels/day,
cubic meters/second, cubic meters/minute, cubic
me ters/hour, cubic meters/day, cubic feet/second,
cubic feet/ minute, cubic feet/hour, cubic feet/day
Defines unit of measure for primary variable.
PV LRV Non linearized

Linearized


value of the measuring span.
PV URV Non-linearized

Linearized


value for the measuring span.
PV Damping Time  
 Level, Interface, Distance/Ullage Select variable to be viewed on display.
Tag alphanumeric 