Need help?Do you have a question about the ABB LMT Series and is the answer not in the manual?
General| Category | Transmitter |
|---|---|
| Manufacturer | ABB |
| Series | LMT |
| Measurement Range | Depends on specific model |
| Output Signal | 4 to 20 mA, HART |
| Accuracy | ±0.075% of span |
| Process Connection | 1/2" NPT |
| Electrical Connection | 1/2" NPT, M20 |
| Operating Temperature | -40 to 85 °C (-40 to 185 °F) |
| Protection Rating | IP66 |
| Material | Stainless Steel |
Essential safety precautions, warnings, and limitations for device operation.
Critical safety guidelines for electrical connections, installation, maintenance, and hazardous areas.
Prerequisites, environmental considerations, and protection ratings for mounting.
Instructions for electrical connections, power supply, and grounding.
Detailed wiring steps, lightning protection, and remote sensor setup.
Initial setup, checks, and managing write protection.
Step-by-step guide for basic device configuration via HMI.
Using the waveform display for diagnostics and troubleshooting.
Considerations for installing and configuring FOUNDATION Fieldbus devices.
To Next Page
