You have purchased a high quality, modern instrument
from ABB Automation. We appreciate your purchase
and the confidence you have shown in us.
This Instruction Bulletin contains information relative to the assembly and
installation of the instrument and the specifications for this instrument design.
ABB Automation reserves the right to make hardware and software improvements
without prior notice. Any questions which may arise that are not specifically answered by
these instructions should be referred to our manufacturing plant in Göttingen, Germany
Tel. 49-0551/905-0 or to the Service person responsible for your account.
Copyright by ABB Automation. All Rights Reserved
The interference resistance of this flowmeter system complies with
the NAMUR-Recommendation NE 21 5/93 and
EMC Guidelines 89/336/EWG
(EN 50081-1, EN 50081-2)
EN 50082-1, EN 50082-2
To Next Page
Loading...
