ABB MATRIX Series - 5 Product Specifications; EIA-485 Connections; Ethernet Connection; Product Setup and Configuration

MATRIX Series | Product Specifications
©ABB 2021 All Rights Reserved.
Subject to change without notice
WWW.CYLON.COM
11
MAN0124 rev 5
5 Product Specifications
EIA-485 CONNECTIONS
Connection Type: 3 position
Termination Count: model dependent, up to 2 connections
Serial: EIA-485
Baud Rates Supported: 9.6kbps, 19.2kbps, 38.4kbps, 57.6kbps, 76.8kbps, 115.2kbps
Data isolation: GMR Data Isolated
Termination: 249 Ohm, switch selectable
Biasing: 3.32k, switch selectable
LED: indication for TXD, RXD, Byte-Error, Parity-Error
Protocol: license enforced, driver selectable
Network Load: license enforced, up to 64 devices per port, license restrictions apply
ETHERNET CONNECTION
Termination Count: 1 connection
Connection Type: RJ-45, female
Speed: 10/100Mb auto-sensing
PRODUCT SETUP AND CONFIGURATION
Software: ASPECT-Studio with USB Copy Protection Key and License File
Browser: Windows Internet Explorer v7.0 or later, Mozilla Firefox v3.0 or later, Apple Safari v3.2 or later,
Google Chrome v1.0 or later
CPU
Processor: ARM Cortex-A8 1 Ghz
Memory: 512MB RAM, 2 GB Flash
POWER REQUIREMENTS
Connection: 2 position
Power Source: 24 VAC, 50/60Hz, 2.7A max
OPERATING CONDITIONS
Temperature: 32-104
o
F (0- 40
o
C) ambient
Humidity: 0-80%, non-condensing
Altitude: -2000 to + 10,000 ft. (-650 to + 3500m)
AGENCY APPROVALS
CE Approved
FCC, Class A Computing Device; Part 15
UL listed 916, Management Equipment, Energy (PAZX)