Need help?Do you have a question about the ABB MNS iS and is the answer not in the manual?
General| Brand | ABB |
|---|---|
| Model | MNS iS |
| Category | Control Systems |
| Language | English |
Describes the physical structure and design principles of the switchboard.
Details the separate compartments for power and control cables.
Focuses on the design and features of withdrawable modules.
Describes the design and application of fixed modules.
Presents examples and schematics of MStart and MFeed module types.
Details the design and testing of the power contact for modules.
Introduces the main components of the MNS iS system.
Explains the function of key MNS iS system components.
Discusses the features and sizes of MStart/MFeed power modules.
Describes conventional feeder modules and their integration.
Details the MControl module, its platform, and scalability.
Explains how MConnect integrates SACE circuit breakers.
Covers the integration of MSpeed and ACS850 variable speed drives.
Describes how information is exchanged within the MNS iS system via MLink.
Explains the functionality and usage of the MView HMI.
Introduces the MNavigate software for system parameterization.
Details the communication protocols and structure within the MNS iS system.
Explains how each cubicle is identified within the MNS iS system.
Describes how to set the location of modules using BCD rotary switches.
Covers the setup and configuration of the MControl module.
Details the MControl unit's main board, extension cards, and LEDs.
Explains how the MControl unit connects to the control condapter.
Details the mechanical locking and connection of the MControl unit.
Briefly states MConnect connection is similar to MControl.
Provides pin assignments for conventional feeder modules.
Covers the setup and configuration of the MLink communication module.
Introduces the MLink module and its communication capabilities.
Details the interfaces, LEDs, and buttons on the MLink module.
Explains the purpose and function of the CF card in the MLink.
Describes the physical installation and connection of the MLink.
Illustrates how to wire the switchgear bus in multiple cubicles.
Shows wiring for dual redundant MLink configurations in multiple cubicles.
Explains the setup and connection of the MView touchscreen interface.
Covers the installation process for MStart/MFeed modules.
Details how to parameterize the system using MNavigate.
Explains how to operate and interlock withdrawable modules.
Describes the operation and interlocking of fixed modules.
Lists different modes for motor operation (local, MView, DCS).
Explains the requirement for control access requests to MControl.
Details methods for local motor operation via hardware or software.
Describes operating motors using the MNS iS Web Interface.
Explains how alarms and trips are displayed and interpreted.
Provides technical specifications for MStart, MControl, MLink, and MView components.
Lists relevant low voltage switchgear and EMC certificates.
Lists related documentation and their publication numbers.
Provides definitions for abbreviations and terms used in the document.
To Next Page
