10
POWERVALUE 11T G2 1-3 KVA B/S
2.1.3 LCD description
—
03
—
03 The LCD display
LCD idle function:
If you enable LCD background idle function when UPS
standby mode is turned off, the LCD background
will be turned off within 5 seconds. Pressing any key will turn the LCD background light on.
2.1.4 LCD icon functions
—
Table 4: LCD icons
Display Function
Input Information
Indicates input voltage/frequency value, which are displayed separately.
Indicates the input relevant to mains, and the input power is single phase input.
Output Information
Indicates output voltage/frequency value, which are displayed separately.
Load Information
Battery Information
occurs, the lowest grid will flash to remind you.
Mode/Fault/Warning Information
Indicates:
• Operating mode
• Fault
• Warning
• Battery remain time
Different warning signals can display alternately at the same time.
Else
Indicates the UPS is in Settings mode.
Indicates the UPS is in Fault mode or has some warnings.
To Next Page
Loading...
Need help?
General