Section 10 Control
10.1 Apparatus control
IP14560-1 v3
10.1.1 Application
M13443-4 v14
The apparatus control is a functionality for control and supervising of circuit
breakers, disconnectors, and earthing switches within a bay. Permission to operate
is given after evaluation of conditions from other functions such as interlocking,
synchrocheck, operator place selection and external or internal blockings.
The complete apparatus control function is not included in this
product, and the information below is included for understanding of
the principle for the use of QCBAY, LOCREM, LOCREMCTRL,
SCILO, SCSWI, SXCBR.
Figure 51 shows from which places the apparatus control function receives
commands. The commands to an apparatus can be initiated from the Control
Centre (CC), the station HMI or the local HMI on the IED front.
1MRK 505 388-UEN B Section 10
Control
Busbar protection REB650 2.2 IEC 151
Application manual
To Next Page
Loading...
