1.7 Fill out the
following items for
outstations only
Capabilities
Current value If configurable, list
methods
● Per Object Group (see part 3) per Object Group
○ Per Object Group (see part 3)
Class 1:
Fixed at______
Configurable, range _______ to
_______
Configurable, selectable from
___,___,___
Configurable, other,
describe_____________
Class 2:
Fixed at______
Configurable, range _______ to
_______
Configurable, selectable from
___,___,___
Configurable, other,
describe_____________
Class 3:
Fixed at______
Configurable, range _______ to
_______
Configurable, selectable from
___,___,___
Configurable, other,
describe_____________
○ Single Buffer
Fixed at______
Configurable, range _______ to
_______
Configurable, selectable from
___,___,___
Configurable, other,
describe_____________
○ Other, describe:
1.7.7 Sends multi-fragment responses: Indicates whether an outstation sends multi-fragment responses (Masters do not send multi-fragment
requests).
● Yes Yes PST or LHMI
(ApplMultFrgRes)
● No
1.7.8 Last fragment confirmation: Indicates whether the outstation requests confirmation of the last fragment of a multi-fragment response.
Table continues on next page
1MRK 511 419-UUS A Section 3
DNP3 protocol implementation
650 series 2.2 ANSI 41
Point list manual
To Next Page
Loading...
