3.10 ANALOG OUTPUTS
AND ANALOG OUTPUT
COMMANDS
Analog Output Status
Group Number: 40
Analog Outputs Group
Number: 41 Analogue
Output Events Group
Number: 42 Analogue
Output Command Events
Group Number: 43
Capabilities
(leave tick-boxes blank if
this data type is not
supported)
Current Value
If configurable, list
methods
○ Fixed at _____ Not Supported
○ Fixed at _____
○ Configurable,
selectable from
___,___,___
○ Configurable, other,
describe_____________
___
3.11 FILE CONTROL
Group Number: 70
Capabilities
Current Value If configurable, list
methods
3.11.1 File Transfer Supported:
○ Yes Not Supported
○ No (set 3.7.6 to “Fixed
at 0” and do not
complete other entries
in section 1.11)
3.2 DNP3 implementation table
GUID-DAF3C524-1298-43C5-AE4A-CAC342300095 v2
The following table identifies which object groups and variations, function codes, and
qualifiers the IED supports in both request messages and in response messages. For
static (non-change event) objects, requests sent with qualifiers 00, 01, 06, 07 or 08 are
responded with qualifiers 00 or 01. Requests sent with qualifiers 17 or 28 are
responded with qualifiers 17 or 28. For change event objects, qualifiers 17 or 28 are
always responded.
1MRK 511 419-UUS A Section 3
DNP3 protocol implementation
650 series 2.2 ANSI 71
Point list manual
To Next Page
Loading...
