3.10 ANALOG OUTPUTS
AND ANALOG OUTPUT
COMMANDS
Analog Output Status
Group Number: 40
Analog Outputs Group
Number: 41 Analogue
Output Events Group
Number: 42 Analogue
Output Command Events
Group Number: 43
Capabilities
(leave tick-boxes blank if
this data type is not
supported)
Current Value
If configurable, list
methods
○ Variation 1 – 32-bit
without time
Not Supported
○ Variation 2 – 16-bit
without time
○ Variation 3 – 32-bit
with time
○ Variation 4 – 16-bit
with time
○ Variation 5 – single-
precision floating point
w/o time
○ Variation 6 – double-
precision floating point
w/o time
○ Variation 7 – single-
precision floating point
with time
○ Variation 8 – double-
precision floating point
with time
○ Based on point Index
(add column to table in
part 5)
3.10.6 Event reporting mode: When responding with event data and more than one event has occurred for
a data point, an Outstation may include all events or only the most recent event.
○ Only most recent Not Supported
○ All events
3.10.7 Command Event reporting mode: When responding with event data and more than one event has
occurred for a data point, an Outstation may include all events or only the most recent event.
○ Only most recent Not Supported
○ All events
3.10.8 Maximum Time between Select and Operate:
Table continues on next page
1MRK 511 419-UUS A Section 3
DNP3 protocol implementation
650 series 2.2 ANSI 69
Point list manual
To Next Page
Loading...
