Interface converter (for remote end data communication)
External interface converter from C37.94 to G703 Quantity:
1MRK 002 245-AA
External interface converter from C37.94 to G703.E1 Quantity:
1MRK 002 245-BA
Test switch
The test system COMBITEST intended for use with the IED
670 products is described in 1MRK 512 001-BEN and 1MRK
001024-CA. Please refer to the website:
www.abb.com/substationautomation for detailed information.
Due to the high flexibility of our product and the wide variety
of applications possible the test switches needs to be
selected for each specific application.
Select your suitable test switch based on the available
contacts arrangements shown in the reference
documentation.
However our proposals for suitable variants are:
RK926 315-AV is provided with one three-phase CT input
with current shorting and with sixteen trip output blocking
contacts. It is suitable when external CT grounding is required
both for the three-phase version and single-phase versions.
One such switch is then used per bay. With such
arrangement the best possible test facilities for BBP &
integrated BFP are available
Test switches type RTXP 24 is ordered separately. Please
refer to Section
"Related documents" for reference to
corresponding documents.
RHGS 6 Case or RHGS 12 Case with mounted RTXP 24 and
the on/off switch for dc-supply are ordered separately. Please
refer to Section
"Related documents" for reference to
corresponding documents.
Protection cover
Protective cover for rear side of RHGS6, 6U, 1/4 x 19” Quantity: 1MRK 002 420-AE
Protective cover for rear side of terminal, 6U, 1/2 x 19” Quantity: 1MRK 002 420-AC
Protective cover for rear side of terminal, 6U, 3/4 x 19” Quantity: 1MRK 002 420-AB
Protective cover for rear side of terminal, 6U, 1/1 x 19” Quantity: 1MRK 002 420-AA
Combiflex
Key switch for settings
Key switch for lock-out of settings via LCD-HMI Quantity: 1MRK 000 611-A
Note: To connect the key switch, leads with 10 A Combiflex socket on one end must be used.
Side-by-side mounting kit Quantity: 1MRK 002 420-Z
Configuration and monitoring tools
Front connection cable between LCD-HMI and PC
Quantity: 1MRK 001 665-CA
1MRK505212-BEN E
Pre-configured
Product version: 1.2
58 ABB
To Next Page
Loading...
